PSW62 Compact UPVC Sliding Window System | Qingdao Honor

The 2026 Market: Efficiency, Replacement, and the Budget That Buys More

The 2026 glazing trend reinforces the point: buyers want stronger energy performance without added installation complexity, accelerated by rising energy costs (FramExpress, December 2025). And the U.S. Department of Energy estimates that energy-efficient windows can save each household roughly USD 300–500 per year in energy costs (Research and Markets) — a payback story that makes upgrading feel less like an expense and more like an investment.

This is precisely where Qingdao Honor Building Products’ PSW62 earns its place: a basic, compact 62 mm UPVC sliding window system that delivers the long life, thermal efficiency, and low maintenance of UPVC at a price point that opens the door to budget-driven projects.

Need technical drawings or standard specs for your project?

Request a Quick Quote

The PSW62 System in Detail

Compact 62 mm Frame: Space You Can Feel

The PSW62’s compact 62 mm profile is its signature advantage. In tight spaces — balconies, kitchens, small bedrooms, utility rooms — every centimeter counts. Because the sashes slide horizontally within the frame plane, nothing swings into the room and nothing protrudes outside. The window occupies no usable space when open, which maximizes both ventilation and daylight in rooms where a casement or awning window would simply not fit.

Lightweight by Design, Economical by Default

The PSW62 is engineered as the basic sliding system in Honor’s range: it is not built with an integrated fly screen, which keeps the system lighter and more economical than the upgraded PSW80 system. For projects where the budget is the deciding factor — or where screens are handled locally — that weight and cost saving matters across a whole order. Importantly, all other performance aspects are identical to the PSW80 system: the same 1.5 mm steel reinforcement, the same three-chamber construction, the same glazing options, the same weather protection.

Steel-Reinforced, Three-Chamber Strength

Every PSW62 frame is reinforced with a 1.5 mm steel liner running through the full profile length (heavier gauges available on request), enclosed inside a three-chamber UPVC structure. Together they deliver dependable basic wind-load resistance, acoustic damping, and thermal insulation — the engineering foundation that keeps a sliding window square, quiet, and warm for decades.

Locks and Weather Sealing

Standard single-point locks pull the meeting stiles together and, combined with high-quality weatherstripping, protect against wind-driven rain and drafts in normal conditions. For higher security requirements or exposed sites, the system can be upgraded to multi-point locks at specification stage. It is the kind of flexibility that lets distributors and contractors price one system across a whole range of projects.

Colors, Lamination, and Glazing Options

Frame colors span White, Black, Grey, and Bronze, plus a wide range of lamination finishes — dark and wood-effect surfaces at UPVC economics. Glazing can be specified as single or double glazed, letting buyers match the thermal budget to the climate: double glazing where energy codes demand it, single glazing where cost rules. For insect protection, the PSW62 can be paired with an invisible roll-up screen as an add-on — a clean, elegant solution that keeps the profile light while still delivering bug protection where needed.

Who Makes the PSW62: Qingdao Honor Building Products

The PSW62 is manufactured by Qingdao Honor Building Products, a professional group fabricator founded in 2015 and headquartered in Qingdao, Shandong Province, China — one of China’s principal export gateways for building materials.

Honor is a specialist by design: UPVC and aluminum window and door systems, nothing else. The UPVC portfolio spans casement series from 60 mm through 82 mm, sliding systems from 62 mm through 112 mm, and single- and double-hung vinyl windows — the complete UPVC window range. The aluminum line covers casement, awning, and sliding windows plus casement, sliding, and folding doors, including thermally broken aluminum systems — and for projects that pair windows with matching entries, Honor also manufactures UPVC doors. One supplier, the entire building envelope: browse the full Honor product range to see every system under one roof.

Honor’s export footprint already reaches Germany, Cyprus, the United States, the Bahamas, Jamaica, Saint Lucia, Chile, Bolivia, and the Philippines, and the company works directly with distributors, retailers, contractors, and property developers on custom orders — project-specific sizes, colors, glazing packages, and hardware specifications included.

How the PSW62 Compares

PSW62 vs. PSW80: The Same Performance, a Lighter Budget

Takeaway: choose the PSW62 when weight and cost matter most — or when screens will be added locally — and get the same core performance as the larger system.

Sliding vs. Casement: Which Opening for Which Room

Takeaway: where space is tight or budgets are lean, the horizontal slider is the pragmatic choice; where full-opening ventilation and a premium European look are the priority, casement systems with tilt-turn function take over.

PSW62 Maintenance Guide

UPVC sliding windows are among the lowest-maintenance fenestration products on the market — no painting, no rot treatment, no coating renewal. The PSW62’s simple horizontal slide mechanism is especially forgiving, but a few minutes of routine care keeps it sliding, sealing, and saving energy for 20–30 years. Here is the schedule:

Monthly (5 minutes)

• Wipe frames and sashes with mild soapy water and a soft cloth. Never use solvents, abrasive pads, or acetone — they dull and can permanently damage the UPVC surface, including lamination finishes.

• Clean glass with a pH-neutral or vinegar-based cleaner.

• Clear the weep holes at the bottom of the outer frame. A blocked weep hole traps rainwater inside the frame — the single most common cause of internal damage across all sliding systems.

Quarterly (10 minutes)

• Vacuum or brush the bottom slide tracks on both the outer frame and the sash meeting rails. Dirt in the tracks is the number one cause of stiff sliding and premature roller wear.

• Lubricate the rollers and track surfaces with a dry PTFE or silicone spray — never oil-based lubricants, which attract dust and gum up the slide.

• Wipe and lightly lubricate the lock mechanism and strike; a sticking lock is almost always dirt, not wear.

• Inspect weatherstripping and gaskets along the full frame perimeter. Look for flattening, cracks, or sections pulling out of the groove, and replace damaged gaskets promptly — a small gap around one sash silently erodes the energy savings the double glazing was chosen for.

• Where an invisible roll-up screen is fitted, wipe the mesh and check that it retracts smoothly into its cassette.

Annually (30 minutes)

• Remove the sashes (where design permits) and deep-clean the full track length and drainage channels before refitting.

• Check exterior sealant joints between frame and wall; reapply exterior-grade sealant where cracking or gaps appear.

• Re-torque visible hardware screws — rollers and lock keepers work best when everything sits square.

• Inspect glazing beads for UV hardening; in high-sun climates, plan bead replacement every 10–12 years.

If Something Goes Wrong

• Sash slides stiffly → clean the tracks and re-lubricate; in most cases this is dirt, not wear.

• Sash rattles in the wind → check the weatherstripping and confirm the lock pulls the meeting stiles fully together; adjust or replace gaskets as needed.

• Water pooling inside the frame → clear the weep holes and check the drainage channels; a blocked drain is the usual culprit.

• Condensation on the frame (not glass) → usually indoor humidity, not a product fault; improve ventilation before suspecting the window.

FAQ

Q1. What makes the PSW62 different from the PSW80 system?

The PSW62 is the basic sliding system: it has no integrated fly screen, which makes it lighter and more economical than the PSW80. In all other respects — steel reinforcement, three-chamber construction, glazing options, locks, and weather performance — the two systems are identical.

Q2. Is the PSW62 suitable for small rooms and balconies?

Yes — that is exactly where it excels. The compact 62 mm frame and horizontal sliding motion use no floor or wall space when open, maximizing ventilation and daylight in kitchens, balconies, corridors, and small bedrooms.

Q3. Can the PSW62 be single or double glazed?

Both. Specify single glazing for the leanest budget or mild climates, or double glazing where energy codes and comfort demand stronger thermal performance.

Q4. Does the PSW62 come with a fly screen?

Not integrated — by design, to keep the system light and economical. Where insect protection is needed, the window can be paired with an invisible roll-up screen as an add-on, or screens can be supplied locally.

Q5. What lock options are available?

Standard single-point locks for dependable day-to-day security, with an optional upgrade to multi-point locks for higher security requirements or exposed sites.

Q6. What colors and finishes are available?

White, Black, Grey, and Bronze, plus a wide range of lamination finishes — dark and wood-effect surfaces included.

Q7. How long will a UPVC sliding window last?

With basic routine care, UPVC windows typically serve 20–30 years. UPVC is moisture-proof, corrosion-free, and never needs repainting — it will not rust, rot, or swell like traditional materials.

Q8. Can I order custom sizes, and do you export worldwide?

Yes. Qingdao Honor Building Products manufactures the PSW62 to project-specific dimensions and exports containerized orders worldwide, with an existing footprint in Germany, Cyprus, the United States, the Bahamas, Jamaica, Saint Lucia, Chile, Bolivia, and the Philippines. Send your opening schedule and quantity for a precise quotation.