CONTACTS
No.467 Changjiangzhong Road, Huangdao District, Qingdao City, China
05th Aug, 2026
The window and door industry enters 2026 under one dominant force: regulatory-driven energy efficiency.
In the European Union, the revised Energy Performance of Buildings Directive (EPBD, EU 2024/1275) is now in its national transposition phase — member states face a transposition deadline in May 2026, with progressive targets applying to new public and non-residential buildings from 2026 onward. The directive’s renovation-first approach puts the building envelope — and the windows within it — at the center of Europe’s decarbonization program.
The market data reflects this shift. The global uPVC windows and doors market is projected to reach USD 32.4 billion in 2026, growing to USD 46.2 billion by 2033 at a 5.2% CAGR, with independent forecasts converging on a 5.5–7.5% growth band through 2033. The residential energy-efficient windows segment alone is expected to climb from USD 12.4 billion (2025) to USD 13.45 billion in 2026.
Three product-level trends define what buyers will specify this year:
1. Triple glazing is moving from premium to standard. Industry guidance for 2026 points to triple glazing as the default specification in cold-climate markets, alongside warm-edge spacer bars and advanced gaskets. Triple-glazed units achieve U-values as low as 0.8 W/m²K, versus 1.2–1.4 W/m²K for advanced double glazing — and can deliver up to 50% better insulation than double glazing.
2. Energy prices keep compounding the payback case. With the UK energy price cap set to rise ~13% from July 2026, high-performance glazing is no longer a “nice to have” — efficient windows can cut heating and cooling demand by up to 30% in a typical home.
3. Multi-chamber UPVC profiles are the engineering answer. A deeper frame with more chambers traps more still air, breaking the conduction path between interior and exterior — the same physics that makes 6-chamber systems the default specification for German and Austrian projects.
This is exactly the environment where Qingdao Honor Building Products’ PCW70 earns its place: a 70 mm, 6-chamber UPVC casement system engineered for double and triple glazing, built for the EU renovation wave and exported around the world.
The PCW70 is manufactured by Qingdao Honor Building Products, a professional group fabricator founded in 2015 and headquartered in Qingdao, Shandong Province, China — one of the country’s principal export gateways for building materials.
Honor is a specialist by design: UPVC and aluminum window and door systems, nothing else. The UPVC portfolio spans casement series from 60 mm through 82 mm and sliding systems up to 112 mm, plus single- and double-hung vinyl windows. The aluminum line covers casement, awning, and sliding windows, casement/sliding/folding doors, and thermally broken aluminum systems. That dual-material capability means a single supplier can cover an entire project envelope — UPVC for residential glazing, thermal-break aluminum for storefronts and large-span openings.
Honor’s export footprint already reaches Germany, Cyprus, the United States, the Bahamas, Jamaica, Saint Lucia, Chile, Bolivia, and the Philippines, and the company works directly with distributors, retailers, contractors, and property developers on custom orders — bespoke sizes, colors, glazing packages, and hardware specifications included.
Parameter | Specification |
System Name | PCW70 |
Material | Multi-chambered UPVC (unplasticized polyvinyl chloride) |
Structure Depth | 70 mm |
Frame Chambers | 6 |
Steel Reinforcement | 1.5 mm galvanized (other gauges on request) |
Standard Colors | White, Black, Grey, Bronze, Customized |
Opening Types | Fixed / Swing Out / Swing In / Tilt-Turn / Awning |
Locking System | Multi-point locks |
Glazing | Double glazed or triple glazed |
Mosquito Screen | Retractable screen compatible |
Every chamber inside a UPVC profile is a pocket of still air — and still air is an insulator. The PCW70’s six chambers multiply the conduction barriers between inside and outside, delivering materially better thermal performance than 3-chamber systems of the same era. The 70 mm structure depth is the European “sweet spot”: deep enough to house triple-glazed units and heavy hardware, without the cost and sightline penalties of 82+ mm premium systems.
This is why the PCW70 is highly popular in European countries: it hits the performance bar that EPBD-driven renovation projects now demand — while remaining price-competitive against thermally broken aluminum alternatives.
Every PCW70 frame and sash is reinforced with 1.5 mm galvanized steel running through the full profile length, roll-formed to match the internal geometry exactly. Heavier gauges are available for large sashes and high-wind zones. The steel provides the structural rigidity that large casement sashes need — preventing sag and twist over decades of use — and, enclosed inside fully sealed PVC chambers, is protected from corrosion even in coastal and high-humidity environments.
Fixed. Maximum glass area for picture windows, sidelights, and transoms.
Swing Out / Swing In. Classic side-hung casement operation, available both outward- and inward-opening to match regional convention (outward in the UK and Caribbean, inward across much of continental Europe).
Tilt-Turn. One handle, two functions: tilt inward at the top for secure night ventilation, or swing fully inward for cleaning and egress. The standard specification for multi-story apartment buildings across Europe.
Awning. Top-hinged outward opening — ideal above counters, in basements, or anywhere ventilation is wanted without compromising privacy or security.
Multi-point locks engage along the full sash height from a single handle — at the handle, top and bottom corners, and intermediate positions — providing forced-entry resistance and even compression of the weather seal around the entire perimeter. Combined with double or triple glazing, the PCW70 delivers the acoustic insulation and draft-free comfort that 2026 buyers increasingly treat as non-negotiable.
White remains the volume standard, but Black, Grey, and Bronze profiles — plus fully customized colors — let distributors and developers match the dark-frame architectural trend that has dominated European facade design for several years, at UPVC economics.
Feature | PCW70 (70 mm / 6 chambers) | PCW60 (60 mm / 3 chambers) | Thermal Break Aluminum |
Thermal Performance | Excellent — 6 still-air chambers | Good — 3 chambers | Good — single polyamide strip |
Triple Glazing Ready | Yes (standard option) | No (double glazing only) | Yes |
U-Value Potential | Lowest in Honor’s UPVC range | Moderate | Depends on system depth |
Cost per Unit (Index) | 115–125 | 100 (baseline) | 150–180 |
Acoustic Dampening | Excellent — 6 chambers + triple glazing | Good | Moderate |
Corrosion Resistance | Inherent — PVC does not corrode | Inherent | Requires coating integrity |
Maintenance | Wipe clean; no repainting | Wipe clean; no repainting | Periodic cleaning, eventual recoating |
Suitable For | Cold climates, EU renovation projects, premium residential | Cost-driven temperate/warm markets | Slim-sightline commercial facades |
Takeaway: the PCW70 delivers near-aluminum performance — with better insulation potential and far lower cost — for projects where the brief prioritizes energy and budget over ultra-slim sightlines.
Aspect | Double Glazed (PCW70) | Triple Glazed (PCW70) |
Typical U-Value | 1.2–1.4 W/m²K | From ~0.8 W/m²K |
Energy Saving vs. Old Single Glazing | High | Up to ~30% further demand reduction |
Condensation Resistance | Good | Excellent — warm inner pane surface |
Acoustic Performance | Good | Better — extra pane + wider cavity |
Weight | Standard | Heavier — reinforced sashes handle it |
Cost | Baseline | Moderate premium |
Best For | Temperate climates, budget-sensitive projects | Cold climates, EU renovation compliance, noise-sensitive sites |
UPVC is the lowest-maintenance frame material on the market — no painting, no rot treatment, no coating renewal. But a few minutes of routine care keeps your PCW70 performing for 25+ years. Here is the schedule:
Wipe frames with mild soapy water and a soft cloth. Never use solvents, abrasive pads, or acetone — they dull and can permanently damage the PVC surface.
Clean glass with a pH-neutral or vinegar-based cleaner.
Clear the weep holes at the bottom of the outer frame. A blocked weep hole traps rainwater inside the frame — the single most common cause of internal damage across all UPVC systems.
Lubricate all moving hardware: hinge pivots, multi-point lock mechanisms, handle gearboxes, and tilt-turn linkage arms. Use a dry PTFE or silicone spray only — oil-based lubricants attract dust and eventually gum up the mechanism.
Inspect weatherstripping and gaskets along the full sash perimeter. Look for permanent flattening, cracks, or sections pulling out of the groove. Replace damaged gaskets promptly — a 1 mm gap around one sash can increase air infiltration by 30–50%, silently eroding the energy savings the PCW70 was chosen for.
On retractable screens: wipe the mesh with a soft brush or vacuum on low power, and check that the screen returns smoothly to its cassette.
Remove operable sashes (where design permits) and deep-clean the frame tracks and drainage channels.
Check exterior sealant joints between frame and wall; reapply exterior-grade silicone where cracking appears.
Re-torque visible hardware screws — multi-point lock espagnolettes work best when everything sits square.
Inspect glazing beads for UV hardening; in high-sun climates, plan bead replacement every 10–12 years.
For Black and Bronze profiles in hot climates: darker surfaces absorb more solar heat. Keep frames clean — dust acts as an insulator that accelerates surface heating — and ensure external shading is considered in design.
Sash won’t close squarely → check the hinge adjustment screws (vertical/horizontal/compression adjustment is standard on PCW70 hardware) rather than forcing the handle.
Handle stiff or grinding → clean and re-lubricate; if the gearbox still grinds, replace the handle mechanism (a standard, low-cost service part).
Condensation on the frame (not glass) → usually a humidity issue inside the room, not a product fault; improve ventilation before suspecting the window.
Q1. Is the PCW70 suitable for cold climates like Germany or Scandinavia?
Yes — it was designed for exactly these markets. Six chambers, 1.5 mm steel reinforcement, and triple-glazing capability combine to deliver the U-values that EPBD-driven renovation projects require. The PCW70 is already widely specified for European projects.
Q2. Can I order custom sizes and colors?
Yes. Qingdao Honor Building Products manufactures PCW70 to project-specific dimensions and offers White, Black, Grey, Bronze, and fully customized colors. Send your opening schedule and color samples — the engineering team will confirm profile, reinforcement, and glazing recommendations.
Q3. What is the difference between the PCW60 and the PCW70?
The PCW60 is a 60 mm, 3-chamber system — the cost-efficient choice for temperate and warm markets. The PCW70 is a 70 mm, 6-chamber system with double and triple glazing support — the performance upgrade for cold climates, noise-sensitive sites, and European renovation compliance. Both share Honor’s steel reinforcement and multi-point lock standard.
Q4. Are the multi-point locks and hardware standard or optional?
Standard. Every PCW70 sash ships with multi-point locking driven by a single handle — no upgrade needed for security or weather sealing.
Q5. Do you support double or triple glazing?
Both. The PCW70 is engineered for double- and triple-glazed units, and Honor can supply or recommend the appropriate IGU (including low-E and argon-filled options) for your climate.
Q6. Can the windows be fitted with mosquito screens?
Yes — the PCW70 is compatible with retractable screens, ideal for the Caribbean, Southeast Asia, and other markets where year-round ventilation without insects is a priority.
Q7. Are the products suitable for coastal environments?
Yes. PVC does not corrode, and the steel reinforcement is enclosed inside sealed chambers, protecting it from salt-air exposure. For properties directly on the water, Honor can upgrade visible hardware to 316 stainless steel.
Q8. What is the typical lead time and MOQ?
Lead times depend on order size and customization. Contact the Honor sales team with your quantity and specification for a precise schedule — and note that MOQ terms are flexible for distributors planning program orders.
Q9. Do you provide export documentation (CE, etc.)?
Honor has a track record of containerized export to regulated markets, including shipments to Germany. Full export documentation is provided per destination; discuss your compliance requirements with the sales team before ordering.
Q10. Which countries do you already ship to?
Germany, Cyprus, the United States, the Bahamas, Jamaica, Saint Lucia, Chile, Bolivia, and the Philippines — with active expansion into additional markets.
Regulation, energy prices, and buyer expectations are all pointing the same direction: high-performance glazing is now the default, not the upgrade. The PCW70 answers that demand with a specification the European market already trusts — 70 mm depth, six chambers, steel reinforcement, multi-point security, and both double and triple glazing — backed by a fabricator with a decade of export experience and a full UPVC + aluminum catalog under one roof.
Whether you are a distributor building a program range, a contractor quoting a renovation package, or a developer sourcing for a multi-building project, Qingdao Honor Building Products can supply the PCW70 — and every other opening in the building.
Contact the Qingdao Honor Building Products team today!
No.467 Changjiangzhong Road, Huangdao District, Qingdao City, China
